This feature provides support for hard disks and solid-state drives with a capacity greater than 2 TB that are reported as pass-through devices (available) or used in a RAID configuration. ■ Disk capacity greater than two terabytes (2 TB)

As an example, hot plugging may be used to replace a failed external disk. When used in conjunction with one or more disks that support NCQ, storage performance is increased on random workloads by allowing the disk to optimize internally the order of commands.Īlso referred to as hot swap, this feature allows disks to be removed or inserted while the computer is turned on and the operating system is running. NCQ is a feature that allows disks to accept more than one command at a time. The array may consist of two to six disks depending on the volume types.

The first volume occupies part of the array, leaving space for the second volume. This technology allows two independent RAID volumes to be created on a single array. Data is distributed across two or more disks to provide data redundancy or to enhance data storage performance. This technology provides the ability to create RAID 0, RAID 1, RAID 5, and RAID 10 volumes on desktop and mobile platforms. This technology provides support for the following features: The main objective of this technology is to improve storage system performance, data protection, and increase fault tolerance. Redundant Array of Independent Drives (RAID) refers to multiple independent disks combined to form one logical drive. The drive (disk management, device manager, file explorer.)Ĭheck out the Intel Rapid Storage Technology Software if you have not already used it: If you move drives from one computer to another then you would want to know about the benefit of the software when the operating system cannot detect There may be issues with other levels of RAID. So for RAID 0 there was no issue with capacity. The drive would be seen in the bios and with the Intel software. This information would not be seen in disk management, device manager, or file explorer.

If you move a drive from one computer to the other, for example primary bay to secondary bay the drive could be unavailable or incompatible. I use the intel software Intel Rapid Storage Technology on all of my computer to check the status of the drives. It is there to improve the performance in handling data. There is no storage on the 32 GB flash cache.

They have 750 GB internal hard drive that works with 32 GB flash cache. Currently I am using several computers that are in RAID 0.

How to divide disks in softraid